Traffic movements at the intersection of SH20A and Kirkbride Road near Auckland International Airport will be restricted from Monday 10 August until March next year.
To allow for construction of the new motorway interchange, drivers will be unable to turn right from Kirkbride Road onto the state highway. There will also be no left turn onto Kirkbride Road for drivers travelling north from the airport.
An additional right turn lane from SH20A onto Montgomerie Road has been temporarily installed to improve access into the Airport Oaks area during construction works at Kirkbride Road.
“Drivers accessing Ihumatao and Airport Oaks can avoid delays by using Montgomerie Road instead of Kirkbride during construction works,” says NZ Transport Agency highways manager, Brett Gliddon.
“Restricting turning movements at the Kirkbride Road intersection allows us room for the construction work and will mean traffic lights can provide more ‘green time’ to improve flows for traffic heading to and from the airport.”
The existing state highway lanes to and from the airport will be maintained throughout construction, although the road layout at the intersection will shift to allow space for construction works on the western side of the corridor.
Those travelling on SH20A to and from the airport are advised to allow additional time for their journey, particularly if accessing parking or accommodation providers in the Airport Oaks area.
Pedestrians and cyclists are advised to avoid travelling on the state highway. A temporary diversion route is signposted between Kirkbride Road and the Landing Drive roundabout until the new shared path on SH20A opens in May 2016.
Traffic restrictions from 10 August 2015 to March 2016 mean there will be no right turn from Kirkbride Road east onto SH20A heading north, no right turn from Kirkbride Road west onto SH20A heading south, and no left turn onto Kirkbride Road west from SH20A heading north.
There will be only one right turn lane for southbound traffic on SH20A turning right onto Kirkbride Road.
